Beginner’s Guide: How to Use a Leakage Tester for Effective Testing

Welcome to this comprehensive beginner’s guide, where you’ll learn how to use a seal tester for effective testing.In all walks of life, product sealing is crucial, whether it is food packaging, pharmaceutical products, or electronic equipment, it is necessary to ensure its sealing to prevent contamination, leakage and damage.The Heruis brand seal tester is widely popular for its efficiency and reliability, but for beginners, there may be some confusion about how to use this device correctly.don’t worry!This article will break down each step of the operation in detail to help you master the skills of sealing testing and ensure that the quality of your products meets standards.Are you ready?Let’s explore together!

1. Understand the basic structure of the Hirays sealing tester

Before starting to use the seal tester, it is very important to understand the basic structure and function of the device.Hirays sealing tester usually consists of the following main parts: host, sensing head, display screen, control buttons and connecting cables.The host is the core of the device and is responsible for all signal processing and result display; the sensing head is used for actual sealing testing; the display screen provides real-time data; and the control buttons are used for setting and operation.For beginners, the first step is to familiarize yourself with and properly install these parts to ensure that the equipment is in good working order.

2. Preparation: Calibration and setting parameters

Before testing, equipment calibration and parameter settings must first be performed.Calibration is a critical step in ensuring detector accuracy and is typically performed using standard sealed test samples.According to the operation manual of the Haris detector, select the appropriate calibration mode and perform calibration to ensure accurate readings of the device.Then, according to the characteristics of the product being tested, set the corresponding testing parameters, such as testing time, pressure range, etc.Although this step is simple, it is extremely important and directly affects the accuracy of the detection results.

3. Preparation and placement of samples

Next, you need to prepare the samples to be tested.Make sure the sample is clean, dry, and has no obvious damage or defects. This is a prerequisite for obtaining accurate test data.Place the sample in the test area of ​​the sealing tester and ensure that the sensing head can completely cover the sealing part of the sample.If the sample is large or has a complex shape, it may be necessary to use special auxiliary clamps to fix the position of the sample to prevent it from moving during the detection process.

4. Operate the sealing tester for testing

When everything is ready, the sealing test can begin.Start the Hirays sealing tester and select the appropriate test mode (such as negative pressure test, positive pressure test, etc.) according to the instructions in the manual.Press the start button and the device will automatically detect.During this process, the display will display detection data in real time, such as internal air pressure, leakage rate, etc.After the test is completed, the equipment will automatically generate a test report to show whether the sealing performance meets the standards.

5. Analyze and record test results

After the test is completed, be sure to carefully analyze and record the test results.Hirays sealing testers usually provide detailed test reports, including various parameters and results of the sealing test.You need to analyze this data carefully to determine whether the product meets the sealing requirements.If abnormal data is found or the test fails, the cause needs to be found promptly and rectified.Record all test data and analysis results to facilitate subsequent quality control and improvement.

6. Carry out necessary troubleshooting

During the use of the sealing tester, you may encounter some malfunctions or abnormal situations.For example, the detection data is unstable, equipment readings are inaccurate, etc.At this point, you need to perform necessary troubleshooting.Consult the device manual to learn about common faults and their solutions; check whether all parts of the device are working properly, such as whether the sensor head is loose and the connecting cable is broken.If you cannot solve it by yourself, it is recommended to contact the after-sales service of the Hirays brand to obtain professional technical support.

7. Equipment maintenance and upkeep

In order to ensure the long-term stable operation of the sealing tester, routine maintenance and upkeep are also necessary.After each use, clean the sensing head and detection area to prevent residues from affecting the next detection results.At the same time, regularly check the device's power supply, display screen, control buttons, etc. to ensure that there is no damage.If the device is not used for a long time, it is recommended to store it in a dry, cool place and perform regular functional checks to ensure that the device is ready for use at any time.

8. Improve professional skills and knowledge reserves

While operating a tightness tester may not be complicated, becoming a true testing expert requires continuous study and practice.Beginners can improve their professional skills and knowledge reserves by reading relevant technical literature, participating in industry training, and communicating with peers.At the same time, understand the latest industry standards and testing technologies, continuously improve and optimize the testing process, and improve work efficiency and testing quality.

in conclusion

Through this article, you have learned about the whole process of how to use the Hirays sealing tester for effective testing.From understanding the basic structure, calibration and parameter settings, to sample preparation, operational testing, result analysis, to troubleshooting, equipment maintenance and professional improvement, every step is crucial.I hope that through these instructions, you can master the skills of sealing testing and ensure product quality.If you are interested in the sealing tester, it is recommended to try it yourself and feel its excellent performance. Hirays looks forward to exploring more possibilities with you!