How to do a good job in waterproof testing of wires?

Electronic technology is an emerging technology that began to develop in Western countries such as Europe and the United States at the end of the 19th century and the beginning of the 20th century. It started with the invention of the telegraph by the American Morse. In 1875, the American Alexander Bell invented the telephone. In 1902, the British physicist Fleming invented the electronic tube.Electronic products developed most rapidly and were most widely used in the twentieth century, becoming an important symbol of the development of modern science and technology.

As a connecting bridge for electronic products, wires have also developed rapidly, and their application volume is astonishing, reaching hundreds of billions.As for electronic products, most of them are integrated circuits and equipped with various electronic components. However, these components are not waterproof. If water enters, it will cause circuit breakage and burn out these devices.As the wire serves as a bridge connecting these electrical devices, it must be waterproofed and sealed.

And due to the diversification and complexity of electronic products.Wire specifications are also constantly increasing.And there are many places where waterproof wires must be used, such as connecting wires for car cameras, connecting wires for outdoor lighting, wires used on ships, waterproof wires used for solar energy, etc. Because the wires used in this situation are likely to come into contact with water, in order to prevent problems before they happen, you must do a wire waterproofing test, so as to minimize product failures caused by the wires not being exposed to water.

So how to do a good job in waterproof testing of wires?

Shenzhen Hiraysi Automation Technology Co., Ltd. has more than ten years of experienceWaterproof testing, seal testing experience.We can clearly tell you that waterproofing of wires mostly means that the joints of the wires need to be waterproofed, because many of the joints are irregular, welded, glued, or directly inserted. Therefore, due to the uncontrollability of this process, the joints cannot be 100% sealed. If the sealing is not good, there will be no leakage, and it will not be waterproof.Therefore, waterproof testing of wires, sealing testing, and wire IP waterproof level testing are indispensable.

The traditional waterproof testing method includes soaking in water. If you put the product that needs to be waterproofed into water and see if there are any bubbles leaking out, it means it is not waterproof.As for wires, this is definitely not possible. First, most wires are relatively small, and bubbles may not leak out when placed in water. They are not suitable for large-scale inspections. They will cause secondary pollution, high labor costs, and the effect is not significant.With the increase in wire waterproofing requirements and the growth in demand, a new wire waterproofing testing equipment has emerged, and many waterproof testing equipment manufacturers have emerged on the market.

Among them, Shenzhen Hiraysi Automation Technology Co., Ltd. is relatively well-known in China. It has been dedicated to the research, development and production of waterproof testing, seal detection and leakage detection equipment for many years.It also promoted system equipment for waterproof and seal detection of wires.

Shenzhen Hirays Automatic Technology's wire waterproof testing equipment and seal tester adopt the air tightness detection method, which is also a wire waterproof testing equipment that uses compressed air as the detection medium.The detection principle is to put the wire that needs to be waterproofed into a relatively sealed tooling, and then rush the gas into the tooling. The changes sensed by the precision pressure sensor of the wire waterproofing detection equipment are transmitted to the waterproof detection system. Finally, after a series of calculations, the gas leakage value can be obtained, and the sealing performance of the wire can be detected based on the leakage value.And IP waterproof rating, because the environments where cables are used are different, so the IP waterproof rating of the cable is very important. The IP waterproof rating directly reflects the waterproof ability of the cable, and you can clearly know in what environment this kind of cable can be used.

Hiraysi Automation Technology Co., Ltd. is located in Hanhaida Technology Park, No. 7004, Songbai Road, Songgang Street, Baoan, with convenient transportation. It is less than 1KM from Songgang Bus Station and the transportation is very convenient.

The picture below shows the on-site display of the wire waterproofing test of a group company of Hirays, which indicates that the wire waterproof testing capabilities of Hirays can rank among the international level.