As a smart lighting device, the safety of channel lights is the standard that determines whether the device can be used normally.People have higher requirements for the air tightness of channel lights, and air tightness detection of channel lights has become a difficult point.If its air tightness is not good, it will affect its normal use and even cause the risk of leakage.For the air tightness test of channel lights, in addition to testing the precision of its structure, there is also a structural sealing test.

Hirays Technology has always made great achievements in the field of air tightness testing, and this time we will share the waterproof testing of channel lights, hoping to be helpful to you.

1. Air tightness testing requirements for four-channel lamps

The four-channel lamp for air tightness testing this time is made of stainless steel with high precision. It has a delicate and generous appearance, similar to some ordinary lamps. It has high-quality waterproof joints, complete silicone rubber seals, arc-shaped multi-angle refraction strengthened glass, waterproof, equation, anti-leakage, and corrosion resistance.

The particularity of the channel light leads to relatively high detection requirements. During the detection, it must not only meet its sealing and non-destructive requirements, but also ensure that the detection results are accurate.

2. Demonstration of the air tightness testing process of four-channel lamps

1. Due to the large shape of the channel lamp, it is not conducive to fully enclosed air tightness testing. In order to achieve non-destructive testing, we use a four-channel air tightness detector, which can detect multiple lamps at the same time. Using the direct detection method, as long as the conduit is connected to the adapter, the instrument can be connected for testing;

2. After connecting the channel light to our instrument, there is a valve island, gas tank and other components inside the instrument as well as the program we have set. After the connection is completed, press the start button when testing the light.At this time, the upper and lower molds begin to close, and clean gas without impurities is filled into the lamp. The instrument display will judge the waterproofness of the lamp based on the gas saturation inside the mold.

3. If the channel light is not sealed and air leakage occurs, the leakage value displayed in the instrument will become larger and larger, and the pressure value will decrease at the same time.At this time, you can determine whether the lamp is leaking, and the instrument test result will also show NG, which means the air tightness test failed.If the tested lamp does not leak, the gas in the tooling mold will be in a constant state after inflation, and the pressure value and leakage value displayed on the instrument will also be stable. The instrument test result will display OK, indicating that the air tightness test has passed.

The copyright belongs to Hirays Technology. Reprinting and counterfeit originality are prohibited. Any violation will be at your own risk.