The insulation effect of the thermos cup focuses on the sealing of the cup lid. If the cup lid leaks during use, not only will the insulation effect be poor, but water leakage will also occur. In order to meet the factory requirements of the cup lid, the manufacturer will conduct air tightness testing on it.As an expert in the R&D and production of air tightness testers, Hirays Technology has customized an air tightness testing solution for the thermos cup lid produced by Huisike.The following content explains the air tightness testing solution of Huisike thermos cup lid.

1. Mold and tooling design

Since the lid of the thermos cup does not have an inflation port, Hirays Technology needs to customize a special mold for it to conduct air tightness testing.The mold can provide a sealed testing environment for air tightness testing and play a role in fixing the product to be inspected.The tooling is the inflatable component of the Hirays Technology detector and an important component of the air tightness detector.

2. Basis for judgment

This tester has produced specificMold, in the detectioncupCover and put inMoldMedium, air tightness detector toolingWill start the inflation function for the moldTo inflate,After voltage stabilizationIVT pneumatic sealing technology independently developed by Hai RuisiWillAutomatically detect and calculate insulationcupCover leakage amount, we can judge based on the air leakage amountcupcover sealing performance, thereby achievingcupCap seal testing purposes.

Three: Introduction to other functions of the thermos cup lid air tightness detector

1、 This waterproof tester can support leakage testing methods such as leakage testing, obstruction testing, positive pressure testing, and negative pressure testing. It has a wide testing range and users can choose according to their own testing needs.

2 , Using a large-size touch screen as the human-machine interface, you can easily monitor the test results and set various parameters during the waterproof test process.

3 . It has an alarm function for qualified and unqualified products, which can eliminate the possibility of manual misjudgment and misdetection.

4 , with 4 switching inputs and 8 relay outputs, it can be controlled by external sensors and switch buttons, and can control external relays, solenoid valves and other actuators, conveniently realizing full automation of testing.

5 . The waterproof tester has 200 user subroutines. By setting the parameters of the subroutine on the touch screen, the user can connect different subroutines in series to form a test process. Through the I/O interface of the leakage meter, the leakage meter can accept control signals from external sensors and control external actuators (relays, solenoid valves, etc.).Thereby automating the testing process.

6. It has a test data recording function, and the test data can be downloaded to a USB flash drive and displayed on the computer.

7. It has barcode scanning function, which can track and record defective products and repair status; host computer function, etc.

Huisike currently orders from Hiraysi TechnologyThe thermos cup lid air tightness detector has been put into production testing, thank youWith the trust and support of Huisike, Hirays Technology is determined to provide customers with the best air tightness testing solutions and equipment.

All content in this article is originally created by Hirays Technology. Reprinting and pseudo-original content are prohibited. Any violation will be at your own risk.