On July 8, the 21st Shanghai International Automotive Manufacturing Technology & Material Show (AMTS 2026) opened to great fanfare at the Shanghai New International Expo Centre (SNIEC).
HIRAYS brought its full portfolio of in-house-developed inspection systems to Booth W1-B10 under the central booth theme "One-Stop Precision Inspection, Covering the Entire Industry Chain." Addressing OEMs, traction-battery makers, thermal-management suppliers, and automotive component manufacturers, the company presented complete full-chain precision inspection solutions — from equipment selection and line integration to on-site commissioning.

As the new-energy vehicle (NEV) sector iterates at speed, sealing standards keep tightening for core components: the "three-electric" systems (traction battery, drive motor, and electronic control), automotive thermal management, and fuel cells. Single-purpose, standalone testers can no longer keep pace with the high-accuracy, high-volume demands of advanced production lines.
Working from the full spectrum of automotive manufacturing scenarios, HIRAYS has built a four-series core inspection equipment matrix covering sealing tests for every category of automotive part — a one-stop answer to OEM quality-control bottlenecks.
01 | Four Series, Built for Every Automotive Sealing Test Scenario
Four in-house-developed series took center stage at the show, with technology spanning the full range from routine airtightness screening to precision fine-leak detection:
1 | Helium Mass Spectrometry Leak Detectors — Capturing Micron-Level Leaks
Across the series, vacuum-chamber helium leak testing systems reach sensitivity on the order of 5×10⁻¹³ Pa·m³/s, making them suited to demanding parts such as traction battery packs, liquid-cooling components, and die castings. Paired with a helium recovery system that cuts consumable costs, they are the standard end-of-line "zero-leak" check for NEV thermal-management and three-electric components — pinpointing fine leaks at joints, welds, and sealing surfaces so no defective unit leaves the line.


2 | Hydrogen–Nitrogen Leak Detectors — Leak Location Plus High-Volume Fast Screening
Integrating collection (accumulation), test, and sniffing modes, the series combines fast batch screening with precise leak pinpointing. It fits A/C lines, brake components, and all types of die castings, delivering cost-effective mid-to-high-accuracy leak detection that improves both inspection throughput and repair turnaround.
3 | RGA Residual Gas Analyzers — A Tool for Trace-Level Process Monitoring
Built on HIRAYS' in-house quadrupole mass spectrometry core, the series performs qualitative and quantitative analysis of gases in vacuum chambers and battery-pack sealing processes. It is widely used for electrolyte leak detection in traction batteries, meeting automakers' strict process-control and compliance requirements.
4 | Multi-Mode Airtightness Testers — Covering All Conventional Component Scenarios
Covering differential-pressure, direct-pressure (pressure-decay), and micro-flow modes, the series supports high-pressure configurations up to 5 MPa and independent multi-channel operation. It is built for airtightness testing of e-motor and electronic-control housings, lamps, radiators, and other conventional parts. Stable and resistant to ambient interference, the systems run 24/7 continuous batch inspection.
02 | More Than Instruments: One-Stop Full-Chain Service
The four-series matrix spans NEV three-electric systems, automotive thermal management, electronic-control housings, A/C and refrigeration systems, fuel cells, safety-critical brake components, die castings, and complete-vehicle accessories — one system covering every sealing test an OEM needs.
Unlike single-equipment vendors, HIRAYS provides end-to-end one-stop technical service: equipment selection, custom fixtures and tooling, automated line integration, and on-site installation and commissioning, all tracked through to handover. Complete test programs and a data traceability system interface seamlessly with existing OEM lines, sharply shortening project ramp-up.
03 | On the Floor: Hands-On Demos, Nonstop Inquiries
Opening day drew a steady crowd to the HIRAYS booth. Visitors from traction batteries, thermal management, and automotive electronics stopped by for in-depth discussions with the technical team on concrete issues — line leak-rate targets, test takt time, and compliance certification.
Drawing on real projects, HIRAYS engineers ran live equipment demos and mapped the optimal test process to each part category, tier by tier, clearly comparing where helium leak detection, hydrogen–nitrogen detection, airtightness testing, and RGA analysis each fit — and their respective cost and accuracy advantages.
To address the line-side pain points raised, the team focused on helium leak systems, quick-changeover fixtures, and multi-channel configurations for the airtightness series, showing directly how the equipment balances high accuracy with production takt — and helping visitors see how the full solution cuts cost, raises throughput, and keeps leak-related defect rates tightly in check.
The booth also offered complimentary one-on-one technical consultations, an interactive lucky draw, and limited-copy industry sealing-inspection case-study handouts, which drew further professional visitors. After seeing the equipment in action and working through the solutions, a number of domestic and overseas customers reached preliminary cooperation intent on site, while many long-standing partners made a special trip to review HIRAYS' latest technology roadmap and discuss follow-up collaboration.
Amid the wave of high-end NEV smart manufacturing, precision sealing inspection has become the baseline for product safety and quality.
HIRAYS will keep deepening its work across the automotive value chain, iterating core technologies in mass-spectrometry leak detection, mass-spectrometry analysis, gas detection, and airtightness testing, and refining its one-stop packaged solutions. With in-house-developed equipment and full-chain deployment service, we help automakers reach efficient, compliant mass production — and work with industry partners to build a new automotive manufacturing ecosystem.
-
2026.11.21APEC Spotlight on Shenzhen | Behind Huaqiangbei's "AI Eight" Craze Lies the Quality DNA of Chinese Manufacturing
-
2026.11.21Changping Town Leaders Visit HIRAYS for On-Site Research and Guidance
-
2026.11.21New CCC Certification Rules Issued in 2026: How Should Power Bank Makers Prepare for the 2027 Mandatory Requirements?
-
2026.11.21CIOE 2026: A Window onto Industry Change — How Should Photonics Production Lines Upgrade Quality Control?
-
2026.11.21HIRAYS Takes the Spotlight at CIOE 2026 | In-House RGA Mass Spectrometry Solutions Draw Industry Attention
-
2026.11.21AMTS 2026 Wrap-Up | Hundreds of On-Site Conversations Reveal Four Emerging Trends in Precision Inspection
-
2026.11.21HIRAYS Wins the A+ Awards New Quality Productive Forces Leadership Award, Redefining Smartphone Waterproof Testing with Hardcore Technology
-
2026.11.21HIRAYS Takes the Spotlight at AMTS 2026 | One-Stop Precision Inspection Powers Full-Chain Automotive Sealing Safety
-
2026.11.21Focusing on a "Zero-Leak" Future for Quality: HIRAYS Presents Its New Answer to Full-Chain Inspection at CMM 2026



