Pet trackers and GPS locators are electronic communication devices. Due to the particular application scenarios of the devices, they are often used outdoors and are often exposed to the effects of special weather conditions. Rain and air will cause certain corrosive effects on the devices.If the sealing of the device is poor, the external environment will cause irreversible damage to the components inside the device. Therefore, it is very important to detect the sealing of pet trackers and locators.

Hirays Technology has made great achievements in the field of sealing testing. The sealing testing of pet trackers and locators is also one of the research focuses of Hirays Technology.Today we will share a case about sealing test of pet tracker, I hope everyone can use it as a reference.

1. Sealing testing requirements for pet trackers and locators

1. As a wearable device, it is small in size. As a smart device, its precision is very important. The accuracy of the display is the focus of people's attention. Therefore, when testing, more attention should be paid to the non-destructiveness, accuracy and operability of the sealing test;

(locator)

2. Due to the high precision of the equipment, it is difficult to carry out direct detection. Therefore, this detection will use indirect detection methods to ensure that the equipment is more convenient during detection and the results are more accurate.

(Pet Tracker)

2. Demonstration of the sealing testing process of pet trackers and locators

1. Since there is a connecting wire behind the pet tracker, its sealing degree must be considered during testing. Therefore, Hirays Technology customized a special testing mold for fixation, and placed the product to be tested in the mold. The entire shape and the mold fit each other, making it easier to close the upper and lower molds tightly during testing;

(Details of sealing test of positioner)

3. Before starting the test, you need to set the values ​​on the sealing testing equipment. Then, put the testing product into the mold, press the start button, and the upper and lower molds are closed to form a sealed space for the pet tracker. The conduit connected to the detector will fill the inside of the mold with clean and impurity-free gas. The instrument will judge whether the sealing of the product meets the standard based on the air pressure inside the mold;

(Positioner sealing tester)

(Tightness tester for pet trackers)

3. Hirays sealing tester has a high degree of automation, short testing time, and a simpler operation interface.The tester is also equipped with"Positive, negative"Two pressure forms and 8 basic test modes can be selected individually or combined.It uses 24-bit A/D conversion, 32-bit CPU operation, and a completely independently developed industrial control operating system, combined with a full-touch human-computer interaction interface.Built-in RS232 serial port, RJ45 network port, USB communication interface, LTP external I/O control port, supports multiple communication protocols, diversified self-service operations, and combines artificial intelligence with intelligence to enhance the operability of the device.

three, Parameter table of sealing tester for pet trackers and locators

The copyright belongs to Hirays Technology. Reprinting and counterfeit originality are prohibited. Any violation will be at your own risk.