Medical flushing guns are medical cleaning and disinfection equipment and must be designed and manufactured in accordance with the standards stipulated by the Ministry of Health's "Medical Cleaning and Disinfection Specifications". The manufacturer pays special attention to the sealing properties of the gun body so that the sealing performance of the medical flushing guns reaches a good waterproof level.To this end, Hirays Technology has developed a medical flushing gun sealing tester for manufacturers, which solves the problem of medical flushing gun sealing testing. The following is an introduction to the medical flushing gun sealing testing solution.
1. Analysis of the importance and key points of medical flushing gun sealing testing
The medical irrigation gun is used for wound cleaning. As a water-contacting device, it must have good sealing properties. First, it must meet the specified waterproof level standard, so that the internal parts of the gun body can operate normally during cleaning and surgery, assisting doctors. Second, good sealing can prevent bacteria and dirt from remaining inside the gun body, and reduce wound infections caused by equipment hygiene.
The customer's medical irrigation gun has an inflation port, but its complex shape is not conducive to inspection. Hirays Technology needs to customize specific fixing devices to solve the problem of fixing and placing the test items.In addition, users requested thisSealing testThe instrument needs to achieve data traceability and provide data reference for later production processes and process improvements.
two,Medical flushing gun sealing testerProduct display
3. Medical flushing gunSealing testerDetailed display
4. Medical flushing gun sealing test parameters
5. Introduction to basic functions
1. This tester can support leakage testing methods such as leakage testing, obstruction testing, positive pressure testing, and negative pressure testing. It has a wide testing range and users can choose according to their own testing needs.
2. Using a large-size touch screen as the human-machine interface, you can easily monitor the test results and set various parameters during the waterproof test process.
3. It has an alarm function for qualified and unqualified products, which can eliminate the possibility of manual misjudgment and misdetection.
4. With 4 switching inputs and 8 relay outputs, it can be controlled by external sensors and switch buttons, and can control external relays, solenoid valves and other actuators, conveniently realizing full automation of testing.
5. The waterproof tester has 200 user subroutines. By setting the parameters of the subroutine on the touch screen, the user can connect different subroutines in series to form a test process. Through the I/O interface of the leakage meter, the leakage meter can accept control signals from external sensors and control external actuators (relays, solenoid valves, etc.).Thereby automating the testing process.
6. It has a test data recording function, and the test data can be downloaded to a USB flash drive and displayed on the computer.
7. It has barcode scanning function, which can track and record defective products and repair status; host computer function, etc.
All contents of this article are original by Hai Ruisi Technology. Reprinting and pseudo-originality are prohibited. Any violation will be at your own risk.
