?Water-cooling pipe is a common water-cooling device. It can restore the temperature inside the equipment to normal levels through water cooling, so that the equipment can be used normally.As a solution provider for sealing testing, Hairis Technology focuses on providing professional solutions in the field of sealing.This time we will analyze the sealing test of water-cooled pipelines, hoping to be helpful to everyone.

Water-cooled pipes are generally composed of water pumps, radiators, cooling fans, thermostats and other devices. The overall precision is high, and the complex internal structure causes general sealing testing solutions to be unable to meet its testing needs. The testing risk is high and the cost is high. The above problems need to be overcome during testing.

(Tightness tester for water-cooled pipes)

In order to overcome the above difficulties, Hairis customized the following solutions:

1. The overall shape of the water-cooling pipe is highly precise. It is connected to two external water pumps and has obvious vents. Therefore, we can use the direct detection method during detection. Before starting the detection, we can connect the pipe connecting the instrument to one of the water pumps and fix the other side to prevent it from leaking gas during the detection. This can ensure that the detection is easier;

(water cooling pipe)

2. The instrument for testing the tightness of water-cooled pipelines uses compressed gas as the medium. When the air enters the inside of the water-cooled pipeline, it will slowly reach the pressure value set by the instrument. Even if the internal gas leaks, it will not affect the internal components, which can reduce the cost of enterprise testing and make the testing results more accurate, providing the best environment for testing;

(Display of the sealing testing process of water-cooled pipes)

3. When the gas inside the water-cooling pipe reaches the pressure value set by the instrument, the instrument will automatically cut off the gas supply. At this time, we can see the leakage of the water-cooling pipe displayed on the instrument, and use this value to determine whether the sealing of the water-cooling pipe reaches the sealing level;

(Sealing tester display parameters)

4. When the leakage value is less than the set air pressure parameter, it proves that the sealing of the water-cooling pipe is at a qualified level. If the leakage value is higher than the air pressure parameter, it proves that the sealing of the water-cooling pipe is unqualified and the product has certain flaws.

Advantages of using Hairuisi sealing testing instruments:

1. High-sensitivity pressure sensing and adjustment unit, combined with advanced differential pressure software algorithm, the minimum resolution can reach 0.1Pa. This algorithm has obtained a national patent

2. The patented technology independently developed by Hairuisi, "IVT pneumatic sealing valve island", greatly improves the test accuracy, ensures the stability of the instrument, and greatly improves the inflation speed.

3. Multiple test functions: The instrument integrates two pressure forms, positive and negative, and 8 test methods: two pressure forms and five test methods can be programmed into more than 20 test functions.

4. It has more than 200 groups of subroutines. Each group of subroutines can be programmed independently and can be selected or combined to meet various complex testing requirements.

5. Full-touch large-screen intelligent operating system, graphical UI design based on the detection process, the operation interface is simple and clear, easy to teach and learn

6. A variety of pressure adjustment components and ranges are available, and a wide air pressure range (-80KPA-1MPa) is available.Optional electronic pressure regulating valve can realize multiple sets of pressure sequential testing

7. Multiple communication interfaces: built-in RS232 serial port, RJ45 network port, USB communication interface, LTP external I/O control port, supporting multiple communication protocols

8. Optional barcode scanning function and printer are available to facilitate product data management and quality traceability. The instrument history record can reach up to 200,000 items and can be exported to the computer in batches.

9. The standard volume identification function can automatically identify the volume of the sample to be tested, and measure and judge the leakage rate in a volumetric manner.

10. Ultra-high stability and ease of use have passed the rigorous test of the market.

11. A variety of accessories are available, including inflatable bypass, quick connector, and standard leak hole. At the same time, the instrument supports third-party calibration and can issue a calibration report.

The copyright belongs to Hairuis Technology. Reprinting and counterfeit originality are prohibited. Any violation will be at your own risk.