Automobile lamps have high requirements for product sealing. If the lamps are not properly sealed, they will easily fog up or even get water in in humid environments such as rainy and foggy days and car washes. This may happen if the lamps encounter water during use."Exploding lights"situation, thereby damaging the driver's personal and property safety, so automobile lamp manufacturers will conduct sealing tests on car lamps.Eagle King Electronics Co., Ltd., which came to Hirays Technology this time to seek solutions for automotive taillight sealing testing, needed a detector in this area.
In terms of lamp sealing testing, Hirays Technology's testing technology and solutions are very mature and have a good reputation in the industry. This is also an important reason why Eagle King Electronics Co., Ltd. chose us.After in-depth communication, our technical staff developed a car taillight sealing test plan based on the testing needs of Eagle King Electronics Co., Ltd. The following is a brief introduction to the plan.
one.Taillight mold and tooling design
Because of this paragraphEagle King ElectronicsCar taillights do not have an inflation port, so Hirays Technology needs to customize a special mold for it to conduct air tightness testing.The mold is divided into an upper mold and a lower mold. After the two are closed, they can provide a sealed testing environment for sealing testing.The tooling is connected to the host machine and plays an important conductive role.
Hirays Technology automotive taillight sealing tester tooling 3D design drawing
two.Detection range and parameters
This sealing tester from Hirays Technology has great selectivity in testing products and testing levels.The measuring range of the instrument is optional in the range of -40-1400kpa, and there are three models.This sealing tester can support leakage testing methods such as leakage testing, obstruction testing, positive pressure testing, and negative pressure testing. It has a wide testing range and users can choose according to their own testing needs.
Parameters of Hirays Technology Automotive Tail Light Sealing Tester
three.Product display of automobile taillight sealing tester
Display of the finished product of Hirays Technology Automotive Tail Light Sealing Tester
Four.Car tail light sealing tester test details display
Display of test details of Hirays Technology automobile taillight sealing tester
five.Introduction to other functions
1. Using a large-size touch screen as the human-machine interface, you can easily monitor the test results and set various parameters during the waterproof test process.
2. It has an alarm function for qualified and unqualified products, which can eliminate the possibility of manual misjudgment and misdetection.
3. With 4switch input and8The relay output can be controlled by external sensors and switch buttons, and can control external relays, solenoid valves and other actuators to facilitate full automation of testing.
4. The waterproof tester has 200segment user subroutines. By setting the parameters of the subroutine on the touch screen, the user can connect different subroutines in series to form a test process, and use the leakage meter's ownI/OThe interface allows the leak meter to receive control signals from external sensors and control external actuators (relays, solenoid valves, etc.).Thereby automating the testing process.
5. It has test data recording function and can download test data to Udisk and displayed via computer.
6. It has barcode scanning function, which can track and record defective products and repair status; host computer function, etc.
Hirays Technology automobile taillight sealing tester test page display
at presentEagle King ElectronicsOrdered from Hirays TechnologyCar taillight sealing testerIt has been put into production testing. Thank you for this.Eagle King Electronicstrust and support.
All contents of this article are original by Hai Ruisi Technology. Reprinting and pseudo-originality are prohibited. Any violation will be at your own risk.
