How to perform air tightness testing on car cameras?
2022.08.17
Font size A- A A+

01Car camera


car cameraIt is used to record the road conditions in front or behind during driving.Video equipment
It mainly includes inside-view cameras, rear-view cameras, front-facing cameras, side-view cameras, surround-view cameras, etc.HeadThe front car camera is mainly used for reversing images (rear view) and360 degree panorama (look around) forDriver-assisted parkingTrigger emergency brakeandAutonomous drivingWaiting for the driving scene.At the same time, when an accident occurs, the video recorded by the on-board camera can be used as evidence of the party responsible for the accident.Judgment basis

 

待测产品车载摄像头

picture1-1 Product to be tested Car camera

If the air tightness of the car camera is not tested, it is very easy for water vapor to enter under special weather (such as rain, snow, fog, etc.) and damage the internal chip; it may also form on the lens.water mist, affecting image quality, camera effects and driving safety.


02Car cameraAir tightness testingpreparation

This time we are going to configure a car camera that can testIP68Waterproof levelofAir tightness detector

As can be seen from the appearance, this model needs to beAir tightness testThe camera does not have any inflation port, but has a wire at the end. This wire does not require air tightness testing.

So we designed this car cameraCustomizedTest the mold and useIndirect detectionAt the same time, a wire trough is reserved on the mold, and the wire is placed outside the mold.As shown below:

 车载摄像头检测准备

picture2-1 Preparation for vehicle camera detection

 

03Car cameras start air tightness testing

Parameter settings: According to product waterproof requirements andIP68grade waterproof grade, the pressure is set to60kpa, intake time5s,Stabilization time10s, test time5s

The maximum value allowed for leakage is0.05kpa ,Equivalent to50pa

 车载摄像头参数设置

picture3-1Vehicle camera parameter settings

After placing the camera into the mold, start the instrument, run the program, and the pressure sensor starts to work. After calculation, the gas leakage value is obtained, and the instrument automatically determines whether the product is qualified.UnqualifiedAt onceCall the police

 车载摄像头气密性检测全套工具

picture3-2 Complete set of tools for vehicle camera air tightness testing

Choose the right instrument and the test will not be tiring!More than 2,000 customers have witnessed the development of Hirays,More than fifty engineersAlways available.7 days fast delivery, is a commitment to you and a requirement to ourselves.Choosing Haris is a choiceStablizeandhigh quality

联系
我们
在线咨询
电话联系
扫码咨询

微信扫码

咨询购买

1对1专业服务

工作日:8:30-20:00

休息日:10:00-18:00

返回
顶部