With the continuous development of science and technology, people are increasingly pursuing a convenient lifestyle.The wall breaker is a mixer that integrates multiple functions and forms part of modern human household appliances.

As an electrical appliance, it must be waterproof. Improper use will cause water to enter the base of the motor through the mixer shaft, causing damage to the circuit, and more seriously, causing problems such as circuit board burnout.

The air tightness test of the wall breaking machine and components is a process that must be done in the factory before leaving the factory.

It is recommended to use the Hairis HC classic series dual-channel air tightness detector and its supporting molds and tooling.

The main purpose of using air tightness detectors and supporting facilities for testing is to quickly detect the sealing between the glass part of the wall-breaking machine and the base, which can achieve fast and efficient testing purposes.

Testing method: Use direct, negative pressure testing method, first customize the mold and tooling according to the structure of the wall breaking machine.According to the appearance characteristics of the security camera, the mold with wire trough and the dual-channel cabinet tooling are customized.

Put the product to be tested into the mold, select the set program, and press the start button.

Inlet pressure -10Kpa, air intake time 5s, pressure stabilization 5s, test time 2s, deflation time 1s.

If the leakage value does not exceed 150pa, it means that the security camera has passed the waterproof test, and the test result will also show OK.

Hairis HC classic series multi-channel air tightness detector

One piece of equipment can replace at least 1 worker;

After the test is completed, it will automatically determine whether it is qualified;

Traceable, all product test data are automatically uploaded to the factory production management system;

The entire set of equipment can be customized according to the actual factory environment;
Benefits:
At least 5-7k labor costs can be saved every month.
●High versatility, you only need to change the mold to detect other products.
●Can monitor the detection process in real time and link with other equipment.