With the popularity of various transportation tools, bicycles have gradually faded out of our lives, but the emergence of shared bicycles has revitalized the traditional bicycle industry.As a green mode of travel, shared bicycles are becoming more and more popular and recognized by the public as a means of transportation; however, shared bicycle locks are prone to water intrusion on rainy days, which affects the use of shared bicycle locks.

Product to be tested: Hello shared bicycle lock

The shared bicycle lock is an out-and-out electronic product, similar to a smart access control. Since it is an electronic product, the electronic components may face challenges from environmental factors, because these bicycles are parked outdoors for a long time. Whether it is the scorching sun or the storm, they stand there quietly. Amidst these damaging factorsThe most unavoidable ones are rain and water immersion. The protection of the lock part is particularly important. First of all, it is necessary to ensure that the lock can be opened and communicated normally. This requires the manufacturers of shared bicycle locks to protect the locks from waterproofing, moisture-proof, mildew-proof, dust-proof, lightning-proof, anti-static, anti-corrosion and many other aspects to prepare for rainy days.

Hello Shared Bike Lock Waterproof Detection Fixture

In addition to making the exterior structure waterproof, moisture-proof, corrosion-proof and anti-penetration, the shared bicycle locks must also beFor air-tightness and waterproof testing, Hirays Technology has done air-tightness and waterproof testing for the Haro shared bicycle lock. Let’s take a look at this case.

Hirays sealing test system

According to the customer's requirements, the Hello shared bicycle lock needs to be inspected as a whole.IP67For waterproof level testing, the following is the equipment and testing solutions used by Hirays Technology:

Equipment used: HiraysHNPilot series three-station air tightness and waterproof testing equipment

Test plan: Indirect test method, customize the mold according to the structure of the bicycle lock, put the bicycle lock into the mold, press the double start button on the tooling and then press the mold down to seal the bicycle lock. The instrument enters the test program and inflates, stabilizes and tests the bicycle lock according to the set parameters.Test the leakage of the product by measuring changes in air pressure(Leak value:≤0.06KPA)The system automatically determines thatOKTaste.Test pressure:10KPA, charging time:12S, stabilization time:10S, test time:8S。

Hai RuisiHNPilot series three-station air tightness and waterproof testing equipment

Hirays Technology's air tightness and waterproof testing equipment has a variety of workstations to choose from, which can meet the needs of different detection numbers of shared bicycle locks. The three-station tooling can test three products at the same time, which is highly efficient!The air tightness and waterproof testing equipmentIt effectively solves the problem of shared bicycle smart locks not being damaged under extremely harsh climate conditions, ensures the normal operation of shared bicycles, and greatly reduces the maintenance costs of shared bicycle operating companies.