The amount of rain in the recent weather has increased significantly. When using street lights, you must ensure that they have good waterproof performance.Street lamps are exposed to the outside for a long time, and the damage to the street lamps is particularly prominent in normal windy and rainy weather, which seriously corrodes their appearance and reduces their service life.In order to extend the service life of street lights, waterproofing becomes very important.
Products to be tested:Street light wiring harness
The interior of the street light is composed of many complex wiring harnesses.Street light wiring harness waterproofThis is also an issue we need to pay attention to.If the street light wiring harness is not waterproofed, it will cause the street light to not light up and cause a short circuit at best; or rainwater will enter the inside of the street light head and corrode the internal wiring harness, causing the wiring harness to come into contact with the light pole, thus affecting people's safety.
Street light wiring harness waterproof detection fixture
The quality and reliability of street light wiring harnesses are increasingly valued by the market and customers. Currently, the waterproof level of street light wiring harnesses needs to reachIP67Waterproof rating test.The waterproof test part of the street light wiring harness is usually the connector port. According to the customer's requirements, Hairis Technology uses the following equipment and solutions for it:
Equipment used:Hai RuisiHPKaituo series of air tightness and waterproof testing equipment
Solution: Use direct testing method to test pressure10KPA, inflation time5S,Stabilization time8S, test time5S, leakage upper limit0.05KPA.According to the structure of the street lamp wiring harness and customer requirements, a four-hole test fixture is designed, which can be tested at one time4products and increase production.Place the street light wire harness into the jig, press the start button and the upper mold presses down and closes the lower mold to form a sealed cavity inside the jig. The instrument detects the air tightness of the wire harness by monitoring changes in air pressure inside the mold through processes such as inflation, voltage stabilization, and testing.
Street light wiring harness HaruisiHPKaituo series of air tightness and waterproof testing equipment
Hairuisi Technology's street light wiring harness waterproof detection has good stability. Technicians can perform the detection without professional training, and the detection time is short and can be detected in one go.4products.
Hairis air tightness and waterproof testing equipment test parameters
Hairuisi has a group of modern high-precision processing equipment and related professionals;Focusing on active innovative breakthroughs in product sealing and plugging, especially in the areas of small and complex special-shaped parts, wire sealing, and high-pressure product plugging testing, we have mastered unique solutions and applied for a number of patents to form our own unique technical advantages.;At the same time, the company also purchased advanced calibration equipment. Each instrument and equipment will undergo harsh environmental aging testing and calibration to ensure the quality of product shipments.
