Due to the use of testing equipment with poor or non-waterproof capabilities, the car antenna cannot receive signals, etc. How to perform waterproof testing of the antenna on the top of the car?Shenzhen Hairuisi Technology Co., Ltd. will tell you below.To do a waterproof inspection of the antenna on the top of the carIf you want to test, then you need to know the sealing and waterproof process used by the antenna.
Most of the waterproofing processes for automotive antennas use sealing rings, glue, or overall glue pouring as the sealing process.The sealing and waterproofing process in these cases can be detected using air tightness testing equipment. If there is a bad situation, it is usually due to the sealing.The material of the sealing ring is not installed properly, or the sealing surface is deformed and the force is uneven. In this case, it is difficult for the human eye to distinguish, so you can use an air tightness detector to detect it.
Car antennas use a sealing process of glue or overall glue pouring. If the connector is not waterproof, it is generally due to insufficient glue, or the unavoidable pores, fine cracks and other reasons during the solidification process of the glue. The traditional detection method uses soaking in water. ThisObviously it is no longer advisable. The soaking in water method is inefficient and cannot be quantified.Air tightness testing equipment can be used. The air tightness testing equipment is a new type of sealing, waterproof and leakage testing equipment that uses compressed air testing method. Among the many air tightness testing equipment, Shenzhen HaihaiThe air tightness testing equipment of Ruisi Automation Technology integrates a positive and negative detection system, and is also equipped with a barcode scanning device and remote control function to facilitate recording and tracking products.And has successfully provided products for many connectors, cameras, wires, wiring harnesses, audio, mobile phone and other companies.Waterproof testing, sealing testing and air tightness testing equipment.
