This time, customers seeking electric toothbrush sealing detection solutions from Hirays Technology need to implement the functions of one machine and three inspections to cope with the increase in production volume and the expansion of production lines.Therefore, Hirays Technology customized its three-station electric toothbrush sealing testing tooling to effectively solve the customer's testing needs.The following is an introduction to the three-station sealing tester.
The picture above is a three-station electric toothbrush sealing tester customized by Hiraysi Technology for users. The three-station detection on the one hand improves the detection efficiency, conforms to the production situation of the customer's production plan increase, greatly enhances the detection load, and can more easily cope with the surge in detection volume in production.On the other hand, the equipment adopts a cabinet design, which saves the space occupied by the equipment and is more in line with human movement habits and behavioral inertia. It can be operated by one inspector, which greatly reduces the customer's labor cost investment.
This electric toothbrush sealing tester is equipped with three detectors to detect the electric toothbrushes corresponding to the tooling. Each machine position independently strictly monitors each product, so that the detection situation can be seen more accurately and intuitively.The equipment has powerful recording functions and information input and output interfaces to realize product quality traceability and better supervise production in order to improve the production process.
Electric toothbrushes need to have a certain degree of sealing to achieve a waterproof effect, so as to avoid damage and leakage caused by water immersion during use.However, the waterproofing of electric toothbrushes uses an overall seal, which is not suitable for direct detection. Indirect detection should be used, and the sealing monitoring of key parts such as buttons, heads, and bottoms needs to be taken into account.Therefore, Hirays Technology customized a mold for the electric toothbrush. When the upper and lower molds are closed, a closed detection space will be formed. On the one hand, indirect detection is achieved, and on the other hand, the electric toothbrush is protected from damage during detection.
During the test, the tooling will rush gas into the mold. Due to the changes in air pressure sensed by the precision pressure sensor of the electric toothbrush sealing detection equipment, the sensor will transmit this information to the detection system. Finally, after a series of calculations, the gas leakage value can be obtained. The sealing performance and IP waterproof level of the electric toothbrush can be detected based on the leakage value.The following is a mold display diagram.
The above content is the electric toothbrush sealing tester customized by Hirays Technology for customers. This instrument has realized single-station and multi-station testing and can be customized according to user needs.At present, this three-station sealing testing equipment has been put into use in many industries such as mobile phones, security, and electrical appliances.
The copyright of this article belongs to Hirays Technology. Reprinting and pseudo-original work are prohibited. Any violation will be at your own risk.
