Hirays Int'l Trading Co.,Limited:+:+:+:+:+:+:

Export & Import

Home About Us Products & Specifications Trade Contact us

Power Semiconductors

Capacitors
•Electric Heating Capacitors
• DC Capacitors
--DC Filter capacitors
--DC Pulse capacitors
• Self-healing shunt capacitors
• High Voltage Shunt Capacitors
• High Voltage Shunt Capacitors Installation
• Other Capacitors

Induction Heating Machine

Automotive Electronics

Casting / Forging & machinery

korean Fabrics

Textile & Accessory

• UV Capacitor • Motor Capacitor

UV Capacitor

For UV Curing ballast , the capacitor controlling voltage output for your ※UV Curing systems§ (the uv lamp power supply), Capacitor are a critical component to consistent curing performance. Our company offer the capacitors to suit the specific switching requirements of most power supplies available today, If you aren't sure of your specific needs, We can help you determine which unit of combination of units would best suit your needs. We are confident that we can obtain any capacitor that you need.

Specification

Micro Farads Range	0.1 uF. 每 30uF
Voltage Range	450V 每 3500V.
Terminal type	Stud type, Blade type (tap connector)
Body type	Round type, Rectangular type

Top

Motor Capacitor

CBB61

Name	Motor capacitor METALLIZED POLYPROPYLENE CAPACITOR
Model	CBB61
Capacitance	1.0-14uF
Voltage	250VAC,300VAC,350VAC,400VAC
Introduction	MGS is motor capacitor self-healing flast style capacitor, which is wound with polypropylene film dielectric, flame retardant plastic case and epoxy resin end seal.

Specifications

Rated Voltage(VAC)		250VAC,300VAC,350VAC,400VAC
Rated frequency		50/60 Hz
Capacitance Tolerance		* +10~ -5% * special order +-3%
Operating Temperature		* -25 to 70 ¡ú Max Rated Voltage 250V * -25 to 85 ¡ú Max Rated Voltage 450V
With stand Voltage test	Between terminals	* Type Test :Rated Voltage x 1.75AC , 60sec * Routine Test (100% Inspection) * :Rated Voltage x 1.75AC , 2sec
	Between terminals and case	* Type Test :Rated Voltage x 1.75AC + 1,000AC ,60sec Min2,000VAC * Routine Test (100% Inspection) * :Rated Voltage x 1.75AC + 1,000AC , 2sec Min2,200VAC
Insulation Resistance		* Min 5,000
Dissipation Factor		Min 1 ‰

CBB60/CBB65

Name	METALLIZED POLYPROPYLENE CAPACITOR FOR AC
Model	CBB60/65
Capacitance	8-50uF
Voltage	250VAC-500VAC
Introduction	CBB65 are non-inductively wound with metallized polypropylene film as the dielectric/electrode with "UL" leads and encapsulated in a plastic case sealed with epoxy resin.

Metallized Polypropylene Film Capacitor For AC

CBB65 are non-inductively would with metallized polypropylene film as the dielectric/electrode with 'UL' leads and encapsulated in a plastic case sealed with epoxy resin.

Features:

• Box type provides the identical outer appearance
• Degree of the protection: P0/P2
• Very low loss at high frequency, suitable for high current
• High insulation resistance, long life due to self-healing effect
• Application to the start-up and operation of 50HZ (60HZ) single-phase motor

Specifications

Reference Standard	GB 3667(IEC252)
Approved Monogram	UL, VDE
Climatic Category	40/80/21
Rated Voltage	250VAC~500VAC
Capacitance Range	8~15¦ÌF
Capacitance Tolerance	± 5%(J) , ± 10%(K), ± 20%(M)
Voltage Proof	Between Terminals 1.6 U R (5s)
Voltage Proof	Terminals to case 2000VAC
Dissipation Factor	0.4%(2 0 , 1KHz, U R )
Insulation Resistance	4000s (20 ,1min)

Top